f2000 DLL
Version 5.1620.0000

Product compatibility

Compatible with the following Pharos Versions:
Version 4.50 onwards

Release History


Build 1620
Fixed a bug about balance changing, and that unable to release jobs when card balance equals job cost
Build 1162
FIXED: Zerolize the card balance.
Build 1043
ADDED: a configuration dialog box, user can enter Unit Number of f2k reader and select
a com port, in DLL's "Config" function, DLL will create the "f2k.ini" file in Pharos\bin.
FIXED: a bug that can not reload f2k.dll well.
Build 1021
Improve release process. No functional changes.
Build 3
Fixed a configuration bug.
Build 2
1) Now user does not have to run Pstation configuration before runing Pstation.
2) User does not have to push the "Eject button" when exit from printing.
Build 1
New release.

Testing information

Model Firmware Version Date Tested
F2000 Model 30V1.0128 May 2002

The F2000 Model 30 Card Reader Logon DLL returns the card balance and card Serial Number.

The f2000.dll bases on F2k.dll offered by Time & Data Systems International Ltd, and f2000.dll works for the high density cards.

In PHAROS Station Configuration, the DLL will create the f2k.ini in PHAROS\bin.

Note: Please manually change the configuration of F2000 Model 30. Following are instructions for F2000 Model 30 setting.

Model 30 setup:

 

The Model 30 should be set up in the following manner:

1.  Insert Gold card labelled Master Card.

2. The display will show Master Menu, Step Down.  Press the Down arrow key

and select Card Density by pressing E.  Use the arrow keys to scroll to the

High Density setting and press E.

3.  Press the Down arrow key and select Site Code.  Press E twice.

4.  Press the Down arrow key and select Setup Unit by pressing E.

5.  Press the Down arrow key and select Unit ID (press E) and set to 0

(press the 0 key and then E).

6.  Scroll down to Card Encoding.  Press E and scroll to Replace Value.

Press E again.  Scroll to the end of the Setup Unit menu.

7.  Scroll up to Set Prices.  Press E and select Cash by pressing E again

(if it defaults to Units, press the up or down arrows to scroll to Cash and

then press E).  At the Price List 1 prompt, press E again.

8.  At the Cash 1, Price 1 prompt, press E, press 1,0 (or whatever price you

want - prices are in 1/10 of a penny/cent) and then press E again to

confirm.

9.  Press Q continually until you quit out to the Flexicard Hello prompt.

10.  Reinsert the Master Card.  Scroll down to Unit Mode and Press E.

11.  Select PRINT (it is very important that you select this unit mode!!).

Unit will reset back to Flexicard Hello prompt automatically.

 

Copyright \© 1994-2002 Pharos Systems Ltd